MS Angle Manufacturer & Supplier in India
Sarthak Ispat Private Limited is a trusted MS Angle manufacturer, supplier, and exporter in India, offering high-quality Equal and Unequal Mild Steel Angles for construction, infrastructure, fabrication, industrial, and EPC projects.
Our MS Angles are manufactured in accordance with IS 808 and IS 2062 standards and are widely used as structural and bracing members where strength, dimensional accuracy, and long-term reliability are critical.
What is an MS Angle?
An MS Angle is a hot-rolled structural steel section with an “L” shaped cross-section, consisting of two perpendicular legs. MS Angles are among the most versatile steel sections, used extensively for structural framing, bracing, supports, and fabrication works.
Depending on design requirements, MS Angles are produced as Equal Angles (both legs of same size) or Unequal Angles (legs of different sizes).
Structural Engineering Principles of MS Angles
MS Angles provide excellent strength in tension and compression and are commonly used where load transfer occurs along edges or corners. They are ideal for secondary structural members and bracing systems.
- Efficient load transfer in corner connections
- High strength-to-weight efficiency
- Easy bolting and welding
- Excellent performance in trusses and frames
Types of MS Angles
- MS Equal Angles – Used for symmetrical load distribution
- MS Unequal Angles – Used where design requires different leg sizes
MS Angle Size Range (Manufactured & Supplied)
The following size range represents commonly manufactured and supplied MS Angles suitable for construction, fabrication, and EPC projects.
| Angle Type | Size Range (mm) | Typical Applications |
|---|---|---|
| MS Equal Angle | 20×20×3 mm to 200×200×24 mm | Industrial structures, transmission towers, bracing systems, fabrication works, supports, and frames |
| MS Unequal Angle | 30×20×3 mm to 200×150×18 mm | Infrastructure projects, heavy fabrication, equipment supports, industrial sheds, and load-specific applications |
Steel Grades & Metallurgical Properties
- IS 2062 E250 – General structural and fabrication use
- IS 2062 E350 – Higher strength for heavy load applications
- Controlled chemical composition
- Good ductility and weldability
Dimensional Accuracy & Tolerances
- Consistent leg length and thickness
- Straightness and angular accuracy
- Uniform surface finish
- Cut-to-length accuracy for project supply
Fabrication & Erection Compatibility
- Easy welding, drilling, and bolting
- Suitable for on-site and shop fabrication
- Compatible with structural steel assemblies
- Quick installation and alignment
Handling, Storage & Transportation
- Stack on level surfaces
- Avoid moisture accumulation
- Proper bundling for transport
- Export-grade packing for overseas shipments
Applications of MS Angles
- Industrial sheds and warehouses
- Transmission towers and telecom structures
- Infrastructure and civil construction
- Fabrication, racks, and frames
- Machinery supports and platforms
- Export EPC and overseas projects
Quality Assurance & Testing
- Chemical and mechanical testing
- Dimensional and visual inspection
- Surface quality checks
- Mill Test Certificate (MTC) with traceability
Standards & Compliance
- IS 808 – Dimensions for MS Angles
- IS 2062 – Structural steel grades
- BIS compliance
- Export documentation support
Procurement, Logistics & Export Capability
- Bulk and project-based supply
- EPC coordination and scheduling
- Domestic logistics and port dispatch
- FOB, CIF, and project-specific delivery terms
Source MS Angles with Confidence
For pricing, technical discussions, bulk quantities, or export coordination, connect with Sarthak Ispat.
Proceed to Product Inquiry